Strong self-adhesive flashing tape with a natural lead-look finish comprising of an aluminum foil and a bitumen rubber adhesive.

• Length: 10m
• The adhesive forms a strong waterproof seal by simply pressing the tape into place by hand.
• Application: Cut to the required length. Remove the backing. Press Flashband into place using fingertip pressure.
• Avoid excessive pressure. When laying adjacent rolls the Flashband must overlap by at least 25mm.
• Use a seam roller or rounded piece of wood to smooth the Flashband and ensure good contact.
• Surfaces must be sound, clean, dust free, and fry.
• Use bituminous Flashband Primer to improve adhesion on porous rough, dusty surfaces in cold or damp weather.
• Porous surfaces-dampen lightly with water before applying.
• Non-porous surfaces should be dry or only very slightly damp.
• Apply Flashband Primer with a water-dampened brush.
• Fill cracks wider than 3mm, deep hollows, or depressions.